Introduce You How To Use The Household Ice Machine

Introduce you how to use the household ice machine

In summer, many families will use ice machines to make some cold drinks. However, how to operate and use the household ice machine? Let's understand the steps

Before starting the machine, it is necessary to check whether the active water supply device is normal and whether the water storage in the water tank is reasonable.
Plug in the power supply, and the ice machine starts to work. First, the water pump starts to run, the compressor starts to start, and the machine enters the ice making state. When the thickness of the ice cube reaches the set thickness, the ice cube will automatically fall. When the ice cubes fall, the ice baffle is flipped over and the reed switch is turned on.

When the reed switch is closed again, the machine enters another ice making process. The compressor does not stop during the entire ice making and deicing process. When the ice bucket is full of ice and the magnetic reed switch cannot be closed automatically, the machine will automatically stop working, and the full ice cubes should be removed. After the magnetic reed switch is closed again, the machine starts and enters the ice making process again.

The thickness of the ice bridge should be about 3mm, and the gap between the probe and the evaporator should be about 1.5mm thicker than the actual thickness of the ice bridge. Turn clockwise to adjust the shaft of the ice blade to increase the thickness of the ice bridge (rotate the screw 1/3 turn to make the thickness of the ice bridge change by 1.5mm). Check the ice plate probe wiring and connecting bracket, it should be free to roll and return to the correct position after each ice cycle.