Several Periodic Inspections Of Small Flake Ice Machine

Several Periodic Inspections of Small Flake Ice Machine

1. Check the oil level
Cleaning time: Check every six months.
Note: 1. Turn off the main power supply.
Operation method: 1. Check whether the oil level of the reducer is lower than 1/2 of the sight glass
2. Change lubricating oil every twelve months

2. Check the electrical part
Cleaning time: Check every six months.
Note: 1. Turn off the main power supply.
Operation method: 1. Check whether the contacts of the AC contactor and thermal relay are oxidized, poor contact, and lack of phase.
2. Check whether the start/stop switch, emergency stop switch, and travel switch are flexible.
3. Check skates (professionals)
Cleaning time: Check every six months.
Note: 1. Turn off the main power supply.
Operation method: 1. Use a feeler gauge to insert the ice blade and the inner wall of the evaporator, and measure the distance between the two
2. The normal distance is: 0.10-0.20mm (below 3T)
Tool used: feeler gauge
The machine has not been operated for a long time (stopped for more than 15 days): Be sure to check whether the parts, water supply, and power supply are normal before starting the machine.