If You Want To Increase The Life Of The Ice Machine, Don't Forget To Maintain It

If you want to increase the life of the ice machine, don't forget to maintain it

There are too many ice-making fields that are used in daily life and production. The more common ones are some supermarkets, and the Snowflake ice machine is specially developed for laboratory ice. The ice yield and ice shape design are also closely related The laboratory needs ice baths, so it is mostly used in life sciences, medicine, agriculture, forestry, fishery, animal husbandry, and inspection and quarantine laboratories. The ice produced by the equipment is amorphous fine particles with a water content between 15% and 25%. It is relatively humid and the temperature is slightly below zero. It has strong plasticity and can enter small gaps.

The automatic snowflake ice machine should pay special attention to maintenance after use, so as to prolong its service life. Let's explain how to maintain this kind of equipment.

1. Before cleaning and maintaining the Snowflake Ice Machine, the user should make sure to turn off the power supply and water source of the Snowflake Ice Machine.

2. The inside and outside of the automatic snowflake ice machine should be kept clean and cleaned regularly. It can be scrubbed with a neutral detergent and then wiped with a soft dry cloth. Clean the Snowflake Ice Maker.

3. The automatic snowflake ice machine must unscrew the head of the water inlet hose every three months to clean the filter inside the water inlet valve, otherwise the sand and dust impurities in the water will block the water inlet of the snowflake ice maker and cause the water intake to change. Small, resulting in no ice making failure.

4. When cleaning the snowflake ice machine, it is strictly forbidden to disassemble the water inlet hose connector, and it is strictly forbidden to use the water pipe to spray water on the fuselage. This will easily cause dangers such as short circuit and electric leakage of the snowflake ice maker.

5. The water blocking rubber plate of the snowflake ice machine installed directly in front of the ice mold frame should be carefully cleaned with a soft towel. It should not be turned vigorously to avoid deformation and cannot block the splashed water droplets on the ice shelf, which will affect the ice-making effect.

6. The automatic snowflake ice machine must clean the dust on the surface of the condenser fins every three months; otherwise, the compressor and other components of the snowflake ice maker will be damaged due to poor ventilation and heat dissipation of the snowflake ice maker. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the surface of the condenser of the snowflake ice machine. Be careful not to use sharp metal tools to clean, so as not to damage the radiator.

7. After the automatic snowflake ice machine is used, it should be cleaned to keep the snowflake ice maker clean and hygienic. When it is not in use for a long time, the dirt and dust in the box should be cleaned, and the water in the snowflake ice maker should be dried with a blower. deposit.