Have You Done All These Maintenance Skills About The Granular Snowflake Ice Machine?

Have you done all these maintenance skills about the granular snowflake ice machine?

The granular snowflake ice machine has the characteristics of fast ice making speed and large storage capacity. The ice produced is in the shape of fine snowflakes and crushed ice, which can penetrate into narrow gaps and bring about a rapid cooling effect. It can be used for laboratory low-temperature reaction and low-temperature storage medium, and can also be used for low-temperature storage of samples in food, medicine, chemical and other industries.

The design structure and refrigeration system of the granular snowflake ice machine, with the attention of some industries that need refrigeration equipment such as laboratories, the market for ice machines has also begun to enter a more favorable category. Today, I will tell you about the pellet ice machine. Of course, the pellet ice machine is also controlled by computer, which also saves the tedious work of manual work.

Today I sorted out some maintenance tips for the granular snowflake ice machine. Have you done all of these?

1. External cleaning of the granular snowflake ice machine

Clean the exterior, at least once a week. Wipe the shell of the automatic ice-discharging particle analysis snowflake ice machine with a clean soft cloth, and wipe grease and dust with a damp cloth containing a neutral detergent.

When cleaning the ice shovel and the refrigerator door panel, put the solution prepared at the ratio of 3L of water and 11ml of 5.25% sodium hypochlorite into an appropriate container, soak the ice shovel in the solution for at least 3 minutes, rinse with water, and drain the excess water Spin dry. After soaking in the solution with a clean rag, clean the door panel, rinse with clean water, and dry with a clean rag.

Clean the inside of the refrigerator, open the refrigerator door, and take out all the ice cubes. Clean the water tank with a neutral detergent that does not contain fine particles, and rinse with clean water.

Wipe the inner surface of the refrigerator door with a clean rag soaked in neutral detergent, and wipe it clean with a clean rag. Rinse with clean water, wipe the solution with a clean cloth, and close the refrigerator door.

4. Filter cleaning

The plastic mesh air filter of the granular snowflake ice machine is used to filter a large amount of dust and dust in the air to prevent the condenser from being blocked and affecting ice production. Remove and clean the filter at least twice a month. Remove the air filter, remembering not to reach into the machine. Wash the filter with warm water and a mild detergent, rinse and dry the air filter with water, then reinstall it in its correct position.

5. Clean the waterway management system

In order to keep a granular snowflake ice machine clean and hygienic, it is recommended that the waterway information system of the granular snowflake icemaker be cleaned regularly. Professional technical service personnel are required to clean the waterway transportation system. Matters needing attention, replace the filter element every three months to avoid clogging the filter and affecting the output of the particle snowflake ice machine.