Common Problems And Solutions Of Ice Machine

1. No ice making

1. Not placed horizontally - required to be placed horizontally

2. The ice plate probe is faulty or too close—replace or adjust the ice plate probe

3. Is the solenoid valve leaking - replace the solenoid valve and filter

4. Refrigerant leakage - check for leaks, repair welding and vacuumize and add refrigerant

2. Loud noise

1. The fan is noisy - check the fan blades, install the screws, correct or fasten them

2. Whether the chassis is deformed - adjust

3. The compressor itself is noisy - adjust and replace

4. Refrigeration system pipeline matcha - adjust the pipeline route

Three, no water, no water

There are two situations:

1. The water pump works but does not supply water

There are several possibilities

1. There is air in the pipeline - exhaust the air in the pump

2. There is too much ice slag at the bottom - shut down and restart drainage

3. Water pump impeller wear - replace the water pump

4. The water pump does not work

There are two possibilities:

1. The water pump is broken - replace the water pump

2. Poor wiring or circuit board failure - check the circuit or replace the circuit board

5. There is ice on the upper part of the ice tray but no ice or thin ice on the lower part

1. The installation of the ice tray is too inclined - adjust the installation

2. Few types of refrigerant - add refrigerant appropriately after determining the type of refrigerant

3. Not placed horizontally - placed horizontally