What To Do If The Flake Ice Machine Is Not Filled With Water

What to do if the flake ice machine is not filled with water

As a kind of mechanical equipment, it is inevitable that the flake ice machine will break down during use. Not filling water is a very common problem. The reasons and solutions will be briefly explained below.
It may be that the water inlet pipe is broken and needs to be replaced, or the water pressure is not enough, and the water pressure needs to be increased. The failure of the compressor will also cause this problem. It is recommended to contact the after-sales service. The solenoid valve of the equipment is faulty and needs to be replaced.
The flake ice machine is a kind of refrigeration mechanical equipment that produces ice after being cooled by the refrigerant of the refrigeration system through the evaporator. The refrigeration system is used, and the water carrier is used to make ice through a certain equipment under the electrified state. According to the principle and production method of the evaporator , The shape of the ice produced is also different. People generally divide the ice machine into several types according to the shape of ice.

Flake ice making is a closed refrigerant cycle heat exchange process. The water flow from the external water source enters the water tank, and the circulation pump pumps the water into the water separator of the ice machine. The water separator sprays the water evenly into the evaporator. On the inner wall, the water quickly condenses into an ice layer under the heat exchange of the refrigerant in the inner cavity of the evaporator. Driven by the reducer, the spiral ice blade slowly cuts off the ice layer in a counterclockwise direction, and the ice flakes fall into the lower refrigerator by gravity without freezing. The ice water falls into the water baffle along the inner wall of the evaporation barrel, flows along the diversion groove, and enters the
The tank goes through the next cycle.
The flake ice machine adopts stainless steel ice blades, which are stable and reliable, and the microcomputer automatic control system ensures the stable operation of the equipment. The double-screw extrusion ice-making method, the shape of the ice-making is amorphous granular ice, which can penetrate narrow spaces, cool quickly, and the ice bath effect is good. Protective shutdown functions such as ice full, water shortage, refrigerant shortage, failure, etc., touch screen operation is convenient and quick, disassembly of main components, such as water distribution pipes and water tanks, without any tools, easy maintenance and cleaning, buffer door design, easy maintenance, time-saving Labor-saving, the stainless steel shell is elegant and durable, and the ice production capacity is sufficient. You don’t have to worry about insufficient ice when the standard configuration is equipped. It is equipped with leakage protection and the operation process is more reliable.