What's The Matter With The Ice Machine Not Cooling And Heating
Leave a message
What's the matter with the ice machine not cooling and heating
The ice machine does not produce cooling or heating, and the solenoid valve is faulty. The solenoid valve needs to be replaced. The following is a summary of the failure analysis of the ice machine not making ice:
1. The machine is running but not producing ice:
1. There is not enough water in the water tray or there is no water.
2. The reducer is faulty or the geared motor is faulty.
3. Ice blockage due to system failure. Dirty, etc.
4. The ice maker is leaking snow, and the pressure is not enough.
5. The thickness of ice cubes is not enough
2. Reduced ice production:
1. The capillary or expansion valve is blocked.
2. The water content in the system is too high and there is a slight ice blockage.
3. The condensing system of the ice machine is blocked.
4. Insufficient or leaking refrigerant.
5. The evaporator is too dirty.
3. The compressor works intermittently:
1. The voltage is too low. Check power supply.
2. The contact point is burned and the contact is not good.
3. System pressure protection.
4. The starter of the compressor is faulty.
5. The condenser is too dirty, high pressure protection.
Fourth, the ice machine leaks:
1. The amount of water supplied to the water tray by the water inlet valve is too large.
2. The connecting water pipe is damaged.
3. The pipe clamp is faulty.
4. The water level float valve is faulty.
5. Wet ice flakes are not hard:
1. The ambient temperature is too high, especially in summer.
2. The repaired machine has more refrigerant.
3. The water supply of the water tray of the ice machine is too large.
4. The power of the press is insufficient.
6. Excessive noise:
1. The fan of the ice maker is faulty.
2. The reducer is faulty.
3. The compressor is noisy.
7. Report system failure when booting:
1. Phase sequence problem.
2. The power supply system is faulty.
3. Control board failure
Eight, water shortage alarm:
1. The filter screen of the water supply joint is blocked.
2. The water supply pipe is blocked.
3. The water inlet valve is blocked.
4. The drain valve is leaking.
5. Water pump failure
