How To Choose An Ice Machine

How to choose an ice machine

1. Ice machine:
It is a kind of refrigeration mechanical equipment that generates ice after water is cooled by the refrigerant of the refrigeration system through the evaporator. The refrigeration system is used to use water as a carrier to produce ice after passing through a certain equipment in the electrified state.
2. Classification of ice machines
1. Classified by ice making method:
Spray type: The water pump of the ice machine sprays water to the top evaporator, the evaporator ice tray is installed horizontally, and the ice cubes are hard.
Flowing water type: the water flows from the upper part of the ice tray relying on the gravity of the water to flow through the ice tray, and the ice tray is installed vertically with high efficiency.
Immersion type: The ice shape has a high freezing point, the melting speed is the fastest, and the fog is opaque, which has been gradually eliminated.

2. Classified by refrigeration method:

Water-cooled type: No water resources required, low operating cost; easy to install and use, and does not pollute the environment.
Air-cooled type: The condensing temperature of the refrigeration unit is low, which improves the refrigeration efficiency; the initial investment cost is lower than that of air-cooled and evaporative cooling; the cooling effect is good.

3. What is the principle of the ice machine?
Using a refrigeration system, water is used as a carrier to produce ice after passing through a certain device in an electrified state.
1. What shapes of ice can the ice machine make?
The shape of ice can be divided into cube ice, snowflake ice, commercial ice, flake ice, scale ice, shaved ice, cylindrical ice, mineral ice, bar ice, plate ice, block ice, ball ice, granular ice, bullet ice, etc.
2. What is the use of industrial ice?
There are three functions of ice: one is for cooling, the other is for eating, and the third is for man-made scenes for viewing.
3. What is "dosing"?
"Dosing" means adding salt. Properly adding salt to the water supply system of the ice machine can greatly improve the quality of ice flakes, making ice flakes more convenient to form and cut, resulting in less ice scraping noise, and protecting the equipment and consuming less electricity.