What Are The Top Ten Items For Installing And Using The Ice Maker?

1) At least two or more people when moving and installing the ice maker. Prevent back or other injury.

2) In order to ensure the normal ventilation of the ice maker, the front end of the installation shall be completely barrier free, and a well ventilated area with a temperature higher than 10 ℃ and a temperature lower than 38 ℃ shall be selected. Must be installed in protected areas from elements such as wind, rain, water spray or dripping.

3) The ice maker cannot be located next to the oven, grill or other high heat source. The ice maker must be installed with all electrical and water connections in accordance with national and local regulations. Standard power supply (115 VAC, 60Hz, 15 A), and proper grounding according to national electrical code requires local regulations and regulations.

4) Do not kink or squeeze the power or drain lines between the ice maker and the cabinet. The fuse (or circuit breaker) size shall be 15 Amps.

5) For normal operation, the ice maker must be leveled. In addition, you need to make several adjustments.

6) All installations must comply with local piping code requirements. Ensure that the hoses are not pinched or kinked or damaged during installation. Check for leakage after connection.

7) Before use, remove the packaging material and clean the ice maker.

8) Turn on the water supply tap and then turn on the ice maker. Do not turn the water when the ice maker is working.

9) If the ice maker is not used for a long time, it must be thoroughly cleaned before the next use. Do not leave any solution in the ice maker after cleaning with disinfection solution.

10) Do not use solvent based cleaners or abrasives internally. These cleaners may spread the taste to the ice, or damage or fade the interior. Do not use any other solvent based detergent products. Ice machine cleaner contains acid. Use rubber gloves to protect hands.