How To Maintain The Flake Ice Machine? How To Prevent The Flake Ice Machine From Being Damaged?

For any maintenance, repair and other work, please be sure to cut off the main power supply of the ice machine before operating. Especially when the ice machine is in the state of "full of ice and lack of water" and stops, do not perform any maintenance or repairs on the ice machine (not to enter the inside of the machine), because the ice machine may automatically turn off at any time. cause injury to persons by starting work. The editor will introduce to you how to maintain the flake ice machine and how to prevent damage to the flake ice machine. Welcome to read!

How to maintain the flake ice machine?

1. The condenser of the flake ice machine has a certain heat dissipation effect during the refrigeration process, and the cleaning of the ice making directly affects the ice making effect. In order to ensure the normal operation of the ice machine, it must be cleaned. Generally, it is recommended to clean the air-cooled condenser once every three months. Under special circumstances, it is recommended to clean it once a month. The water-cooled condenser is generally cleaned once every six months. Under special circumstances, it is recommended to clean the cooling tower once a month. .

2. It is recommended to clean the water tank, evaporator, cold storage tray, distribution tray and surface of the flake ice machine once a month.

3. When the flake ice machine is out of service for a long time (more than 15 days), if the ambient temperature is lower than 5°C, if the ice machine uses a water-cooled condenser, the water in the condenser should be drained to avoid frostbite. Please be careful before starting the machine. Check all parts of the ice machine, water supply.

How to prevent damage to the flake ice machine:

① Do not cut off the water source when the equipment is running.

②When switching the storage door, the movement should be gentle, and the door should not be kicked or slammed.

③ Do not store any items around the storage refrigerator, so as not to hinder the ventilation and deteriorate the hygienic condition.

④ When starting the machine for the first time or when it is not used for a long time, the compressor heater should be powered on for 3-5 hours before starting, and then the ice machine should be operated.

⑤ It is forbidden to expose the ice maker electrical box to a place with high air humidity for a long time without opening it. If the humidity is too high, it may cause the PLC control system and touch screen circuit board to burn out.