How To Get Water From The Ice Maker?

When the commercial ice machine works normally, it is a low-temperature ice-making equipment that generates ice after water is cooled by the refrigerant of the refrigeration system through the evaporator. The equipment can make ice normally when the equipment is powered on. The principles and production methods are different, so there will be different types of ice cubes, such as square ice, bullets and other ice shapes,
But how to operate the water receiving method of the purchased commercial ice machine?
Locate the intake valve of the commercial ice maker, and adjust the distance between the intake pipe and the faucet, in order to ensure that the intake pipe is connected to both. The joint is placed at the outlet of the faucet, and the end of the air intake pipe is connected to the upper part of the joint with a steel ball. The other end of the intake valve is connected to the butterfly joint of the intake valve, and the nut of the intake pipe is turned clockwise, and then tightened. Check whether the connection of each component is firm, then open the water hole head, the water flows to the water inlet valve, check whether there is any leakage outside the connection, and check in time if the leakage is found on the first day to ensure that there is no leakage at the connection of each component.
During the use of commercial ice machines, regular cleaning and maintenance are required. Normally, the filter screen needs to be cleaned within half a month, cleaned with a neutral detergent solution, cleaned with a soft brush, and then dried and installed before normal use. .