Why does the block ice machine not make ice?

The use of block ice machines in the field of domestic refrigeration, fresh-keeping and cooling has been very common, and the production technology of block ice machines is also a very mature standard; however, some small problems with this kind of mechanical equipment are common, so what are the reasons why block ice machines do not make ice?

1. There is no response from the block ice unit, which is generally a defect of the refrigeration unit. You can check whether the main power supply has electricity and what voltage it is, and check whether the electrical control box of the block ice machine is normal.

2. The block ice unit works normally, but do not supply ice. The water distribution plate lacks water, or the water distribution plate has too much water. You can adjust the water level of the water distributor to a suitable level by adjusting the water supply valve on the water supply pipe of the ice bucket and referring to the manual. orientation.

3. Press the start button to start ice making, the compressor and other motors do not work, the ice production full protection indicator light is on, or the main switch is powered off, or the start button is damaged, the PLC computer board is damaged, and the ice cubes in the refrigerator are indeed gone. Full, or the anti-icing switch is damaged, and there is no power supply, and the main brake of the power supply is damaged, and the PLC computer board is defective.

4. The compressor of the block ice machine can work normally, but it is not refrigerated, so it cannot form ice. The reason for this situation is generally that the internal refrigerant of the block ice machine is not good or the two-way solenoid valve of the refrigerator is damaged, resulting in the compressor If the seal is not tight, you can check whether the refrigerant is sufficient, add refrigerant properly or replace a new solenoid valve pair.