What are the reasons for the uneven ice in the automatic snowflake ice making mechanism?

What are the reasons for the uneven ice in the automatic snowflake ice making mechanism?

Snowflake ice-making machine ice is better than manual precision, because the value is pre-written into the program, and the size of the ice is controlled by the program. Therefore, if the ice is uneven, and the unevenness is severe, and the thickness is particularly inconsistent, you need to Consider a malfunction.

What are the reasons for the uneven ice in the automatic snowflake ice machine?
Reason 1: Improper adjustment of the temperature sensing head of the evaporator;

Reason 2: The water spray system of the ice machine is blocked;

Reason 3: The refrigeration system of the ice machine is faulty;

Reason 4: The water temperature and room temperature exceed the specified range;

Reason 5: The water flow of the ice machine is too fast;

Reason 6: The condenser of the ice machine is too dirty;

The corresponding solutions are as follows:

Solution 1: Readjust the temperature sensor of the automatic snowflake ice machine;

Solution 2: Check the blockage of the waterway of the sprinkler system, and clear it by yourself or find relevant personnel;

Solve the reason 3: Check the fault and repair it, you can seek the assistance of the manufacturer;

Solution 4: Readjust the water temperature and room temperature;

Solution 5: Adjust the flow rate of the water pump outlet to decelerate the water flow;

Solution 6: Clean the air-cooled automatic snowflake ice machine with fin cleaner; clean the condenser with descaling agent for water-cooled.

The above is the analysis and solution of the reasons for the uneven ice production of the automatic ice machine, just compare and deal with it!