How to deal with the excessive noise of the laboratory ice machine?

How to deal with the excessive noise of the laboratory ice machine?

There will be a certain amount of noise when the machine is started, but the difference is in the size of the sound. The laboratory ice machine is also not immune.

There is no problem with the noise within the normal range, or the sound equivalent to that of a new ice machine. If the noise is too loud and interferes with the normal experimental environment, you need to find out the reason and deal with it!

How to deal with it?

There are three reasons for the noise of laboratory ice machines:
1. The placement position is uneven;

2. Items are placed on top of the ice machine;

3. Foreign matter enters the inside of the machine.

The problem of causing the noise of the laboratory ice machine is relatively simple, especially the first two. If the noise is caused by the resonance of the top items, just remove the items; if the installation position is uneven, either transfer the ice machine to a flat ground, or Turn the bottom screw so that all four feet of the ice maker are in contact with the ground.

It is a little more complicated for foreign matter to enter the ice machine, and it is necessary to cut off the power before processing. Before processing, the location of the foreign matter must be determined, and the internal foreign matter should be removed with tools, so that excessive noise will not appear. These are the reasons and solutions for the excessive noise of the laboratory ice machine!