What are the instructions for the use of the flake ice machine and the characteristics of the ice flakes of the flake ice machine?

Instructions for use of flake ice machine:

1. The flake ice machine should be installed in a place away from heat sources, avoid direct sunlight, and in a well-ventilated place. The ambient temperature should not exceed 35 degrees, so as not to cause poor cooling of the condenser due to excessive ambient temperature and affect the ice-making effect. The ground of the flake ice machine should be flat and level, and the ice machine must be kept level, otherwise it will cause no deicing and running noise.

Second, the gap between the back and the left and right sides is not less than 30cm, and the gap at the top is not less than 60cm. Independent power supply, dedicated line power supply, fuse and leakage protection switch, reliable grounding.

3. The water used by the flake ice machine should meet the national drinking water standard, and a water filter device should be installed to filter impurities in the water, so as not to block the water pipe and pollute the pool and ice mold. Affects ice making performance.

Fourth, handle the flake ice machine with care to prevent violent vibrations. The inclination of the transport should not be less than 45 degrees. After long-distance transportation, the flake ice machine should be placed for 2-6 hours before it can be turned on to make ice.

5. When cleaning the flake ice machine, the power should be turned off. It is strictly forbidden to directly wash the machine body with a water pipe, and scrub it with a neutral detergent. It is strictly forbidden to clean it with corrosive solvents such as acid and alkali.

Sixth, the flake ice machine needs to be rotated for two months before it can be screwed into the water hose head to clean the filter screen of the water inlet valve to prevent the sand and mud impurities in the water from clogging the water inlet, which will cause the water inlet to become smaller and cause no ice to form.

7. Clean the dust on the surface of the condenser every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, brush, etc. to clean the oil dust on the condensation surface, and do not use sharp metal tools to clean it, so as not to damage the condenser.

8. The water pipes, sink, storage bin and protective film of the flake ice machine should be cleaned every two months. When not in use, it should be cleaned, dry the ice mold and the water in the box with a hair dryer, and place it in a dry and ventilated place without corrosive gas, avoiding open storage.

What are the characteristics of flake ice machine?

1. Due to the flat shape of ice, it has a larger surface area than other forms of ice of the same weight. The larger the contact area, the better the cooling effect. Because such an ice layer is 2-5 times more efficient than tube ice and granular ice.

2. Flake ice is dry, soft, and has no sharp angles, which can protect the packaged food during the refrigerated packaging process. Its flat shape can reduce the damage to the human body caused by the refrigerated items.

3. Due to the huge surface area of the flake ice, the heat exchange process is very fast, and the flake ice can quickly melt into water, take away heat, and increase the humidity of the mixture.