The slow down of the flake ice machine may have the following reasons

The slow down of the flake ice machine may have the following reasons

The slow down of the flake ice machine may have the following reasons:

1. Insufficient refrigerant or too much refrigerant: These will affect the ice making efficiency of the ice machine.

2. The ambient temperature is too high: the best effect of the ice machine is of course the lower the environment, the better the ice-making effect, so when the ambient temperature is too high, it will also affect its ice-making efficiency. Generally, it is best to control the ambient temperature Within 35 degrees Celsius.

3. There is a problem with the working point of the ice machine: the ice machine should be placed in a place that is ventilated and easy to dissipate heat. If it is stuck in a corner, it will seriously affect various performances of the ice machine, such as refrigerant pressure. Too high or too low, causing the compressor to work abnormally.

4. There is gas or debris in the refrigerant pipeline, or the pipeline is deformed.

5. If the machine is air-cooled, it may be because the fan and electrical appliances are broken and the rotation is relatively slow, so the heat dissipation effect is not good, resulting in slow ice making. Once the time is long, the compressor may be burned out.

6. The place where the ice machine is placed is not correct: the ice machine should be placed in a place that is ventilated or where heat is easy to dissipate. If you put the ice machine in a small triangular gap, it will seriously affect the ice machine. The working of the ice machine will prevent the heat from dissipating, and in severe cases, the compressor will not be able to work, and it may even cause no cooling.

7. If the ice machine is an air-cooled type, it may make ice slowly because the fan (Draught Fan) is broken, which makes its rotation speed slow down, which will cause the machine to not dissipate heat well. If the heat cannot be dissipated, the cooling speed will not work, and the ice making speed will also slow down.

In addition, factors such as voltage instability, high water temperature, and blockage of the water tank may also cause the ice maker to freeze slowly. If these problems occur, measures need to be taken in time, such as replacing the refrigerant, adjusting the working point, cleaning and repairing equipment, etc., to ensure the normal operation of the flake ice machine and the ice-making effect.