Analysis and Solution of Common Problems of Snowflake Ice Machine

The snowflake ice machine is specially designed for laboratories, especially suitable for use in laboratories such as life sciences, medicine, agriculture, forestry, animal husbandry and fishery, inspection and quarantine. The snowflake ice machine will also have some faults during the use process. Users need to have some common fault analysis and resolution skills. The following is a brief introduction to several common faults.

1. Noise
The reasons are:
1. It may be that the snowflake ice machine is placed unevenly. The solution is to turn the fine-tuning screw at the bottom of the ice machine to fine-tune the height. When the fine-tuning screw touches the ground and the four feet touch the ground, it is in the best state.
2. There are items on the top of the snowflake ice machine. The ice maker and the items placed on top of it can resonate when the motor starts, making noise. Removing the items on top of the snowflake ice machine can make it not resonate, and the noise will naturally be eliminated.
3. A small object fell into the machine part at the rear of the Zhixin Snowflake Ice Machine.
Solution: After cutting off the power of the ice machine, take out the small items that fell into the machine and the noise will disappear.

2. Frosting and condensation
Reasons and solutions:
1. When the air humidity is high, foggy condensation will appear on the outer surface of the ice machine, just wipe it dry;
2. It is frost or ice beads on the back of the refrigerator. Because the temperature of the back of the refrigerator is lower than 0 degrees when the refrigerator is working, frost or ice beads will be formed. They will automatically melt when the machine is turned off. normal phenomenon.