What's The Matter With The Thin Ice Flakes Of The Flake Ice Machine? Why Does The Motor Keep Burning?

What's the matter with the thin ice flakes of the flake ice machine? Why does the motor keep burning?

flake ice machine ice flakes

Generally, new machines will not have any problems. Most of them will appear after the machine has been used for half a year. The main reasons are as follows:

1. The brine pump of the flake ice machine was broken, and the brine was not added;

2. There is no more brine in the brine tank, or only water is added without adding salt according to the proportion;

3. The flake ice machine leaked fluorine, and it needs to be tested with a pressure gauge;

Why does the flake ice machine keep burning the motor?

The motor of the flake ice machine is burned because the internal resistance of the ice bucket is too large.

Usually because of three points:

1. The ice blade bearing is broken, the gap between the ice blade and the wall of the ice bucket becomes larger, and the ice blade is relatively thick, so the ice blade bearing needs to be replaced;

2. The lower bearing of the main shaft of the ice bucket and the lower bearing of the main shaft are broken, or it may be caused by the main shaft, and the ice bucket needs to be disassembled for inspection;

3. The reducer is stuck inside or the transmission shaft of the reducer is broken, and the reducer needs to be replaced;