What Requirements Should Be Met When The Flake Ice Machine Is Used

What requirements should be met when the flake ice machine is used

The flake ice machine needs to meet the following requirements:

Site requirements: The flake ice machine should be placed in a place away from heat sources, without direct sunlight, in a ventilated and dry environment, and without debris piled up around it. Keep the distance between the condenser fan and the wall at least 1 meter to ensure good heat dissipation of the machine.

Water source requirements: Use water sources that meet local drinking water standards, and install filters and other equipment to remove impurities in the water and avoid blocking water pipes and affecting ice-making performance.

Operational requirements: Check whether the direction of the skates is correct before each use; the temperature of the water supply should be 16 degrees, and the ambient temperature should be around 25 degrees; check whether the electrical system is normal before starting the machine, and run after troubleshooting; observe the water distribution plate during operation Water level, icing on the surface of the evaporator, compressor suction pressure, etc., to ensure the normal operation of the machine; after the ice making is completed, turn off the "Start/Stop" switch in time.

Maintenance requirements: Regular cleaning of filters, water pipes, sinks, storage refrigerators and other equipment; Unscrew the head of the water inlet hose every two months to clean the filter screen of the water inlet valve; Regularly check whether the condenser fan is running normally and clean the condenser in time Dust on the surface.

In addition, you need to pay attention to safety when using the flake ice machine to avoid accidents such as electric shock. At the same time, in accordance with local laws and regulations and relevant regulations, rational use and discharge of waste water to avoid environmental pollution.