Special Precautions During The Use Of Snowflake Ice Machine

Snowflake ice machine is a commonly used ice maker product with fast cooling speed and good ice bath effect. It is specially designed for laboratories and is especially suitable for use in laboratories such as life sciences, medicine, agriculture, forestry, animal husbandry and fishery, inspection and quarantine.

The installation location of the snowflake ice machine is still particular, the main thing is that the instrument should not be too close to the wall. If it is too close, it will cause a big problem in the heat dissipation of our rear compressor.

Second, when there is some ice on the copper pipe of the radiator, if you want to remove the ice, you must turn off the machine to remove it. It is recommended to keep it at room temperature for a period of time, and the ice will melt to achieve a satisfactory effect. .

Third, the Snowflake Ice Maker must be placed in a dry and ventilated place. It must be ensured that there are no sources of interference to ensure a good environment for the Snowflake Ice Maker.

How to use snowflake ice machine

1. The snowflake ice machine should be installed away from heat sources, without direct sunlight, and in a well-ventilated place. The ambient temperature should not exceed 35 degrees Celsius to prevent the high ambient temperature from causing poor cooling of the condenser and affecting the ice-making effect. The ground where the ice machine is installed should be solid and flat, and the ice machine must be kept level, otherwise it will not de-ice and generate noise during operation. 3. The gap between the back and the left and right sides of the ice-making machine should not be less than 30cm, and the gap at the top should not be less than 60cm.

2. The water used by the ice machine must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water, so as not to block the water pipe and pollute the water tank and ice mold. And affect the ice making performance.

3. Turn off the power supply when washing the snowflake ice machine. It is strictly forbidden to use a water pipe to directly point at the machine body to wash it. It should be scrubbed with a neutral detergent.

4. The snowflake ice machine must unscrew the head of the water inlet hose for two months to wash the filter screen of the water inlet valve to prevent the sand and mud impurities in the water from blocking the water inlet, which will cause the water inlet to become smaller, so that ice cannot be made.

5. The snowflake ice machine must clean the dust on the surface of the condenser every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to wash the oil and dust on the surface of the condensation, and do not use sharp metal tools to clean it, so as not to damage the condenser.