How To Solve The Problem That The Flake Ice Machine Is Running But No Ice Comes Out?

The flake ice machine has a long service life, and the equipment loss of the ice machine will cause the ice machine to operate normally, but it will not drop ice. Let's analyze and solve the problem that the ice maker will not drop ice.

Reason 1: The ice cube is too thin, so the ice cube completely melts on the ice tray before it falls off, and the second one is made again.

Solution: Adjust the ice thickness probe. If it's a screw, turn the screw inward to allow the ice to thicken. That is to say, the farther the iron sheet of the ice thickness probe is from the ice plate, the thicker it is, and vice versa.

Reason 2: The ice tray is too dirty.

Solution: Clean the ice tray. Ice trays are generally cleaned with grams and acidic liquids.

Reason 3: The ice tray is desoldered.

Solution: The front ice tray is desoldered, remove one desoldered directly, and the anti-copper tube is desoldered, intending to replace the ice tray. If welding can be repaired, consider welding.

Reason 4: The metal of the ice tray is split from the plastic part of the edge.

Solution: Apply silica gel from the new crack.

Reason 5: The condensed water output is too large, and condensed water is drained during defrosting.

Solution: adjust the pressure water stop valve to make less water out.

Reason 6: The defrosting valve is not open.

Solution: Connect the defrosting valve to 220V to see if it can be opened. If it can be opened, the computer board is faulty. The defrost valve is faulty and cannot be opened, replace the defrost valve.