Does The Ice Machine Need To Be Drained?

needs.

When you stop using the ice machine, you need to open the drain to drain the remaining water. In addition, when the ice machine is full, the ice full indicator light is on, the ice machine stops making ice, and the drain needs to be opened to drain the remaining water.

Ice machine is a kind of refrigeration mechanical equipment that generates ice after water is cooled by the refrigerant of the refrigeration system through the evaporator. The refrigeration system is used, and the water carrier is used to produce ice after passing through a certain equipment in the electrified state. Through the water inlet valve, the water automatically enters a water storage tank, and then is pumped to the shunt pipe by the water pump, and the shunt pipe evenly flows the water to the evaporator cooled by the low-temperature liquid refrigerant, and the water is cooled to the freezing point, which is cooled to the freezing point The water will freeze into ice, and the water that has not been frozen by the evaporator will flow into the water storage tank again, and the circulation will start again through the water pump.

When the ice cube reaches the required thickness, it enters the deicing state, and the high-pressure hot gas discharged from the compressor is diverted to the evaporator through the reversing valve to replace the low-temperature liquid refrigerant. In this way, a layer of water film is formed between the ice cube and the evaporator, and this layer of water film makes the ice cube break away from the evaporator, and when the ice cube falls freely into the ice storage tank below by the effect of gravity.

Through the supplementary water valve, water automatically enters a water storage tank, and then through the flow control valve, the water is pumped to the splitter head, where the water is evenly sprayed on the surface of the ice maker and flows through the ice maker like a water curtain The water is cooled to the freezing point, and the water that has not been evaporated and frozen will flow into the water storage tank through the porous grooves, and the cycle work will start again.