Why are block ice machines so popular in the market?

Why are block ice machines so popular in the market?

Small direct ice making

The small direct ice-making block ice machine adopts the overall installation form, and all the equipment is installed on a steel frame, which is in line with container transportation, easy to install, and can be put into operation when the power supply is provided.

large direct ice

The whole machine adopts a modular design, and the large direct ice-making block ice machine is divided into a unit module, an evaporator module and a cooling tower module, which is convenient for transportation and installation. The evaporator module is divided into several according to the size of the machine.

Unit module: including compressor, liquid receiver, water condenser, refrigeration pipeline, valve, control electrical box, etc.

Cooling tower module: including cooling tower, cooling water pump, cooling water pipe, etc.

Evaporator module: mainly evaporator and some supporting equipment.

All modules comply with container shipping requirements.

direct ice making container

All the equipment of the whole block ice machine is installed in the ISO standard container, which is convenient for transportation, installation and movement. There is no need for any pipeline connection on site, and it can be put into operation only by providing the site, water and electricity, or it can be directly installed on the truck. above, forming a mobile ice-making station.

Brine ice block ice machine

When starting to make ice, add water to all the ice buckets, put them into the salt water pool, press the start button, and the refrigeration unit starts to run. The brine mixer circulates the brine in the brine pool, exchanges heat with the refrigerant inside the titanium coil evaporator, lowers the temperature of the brine, and then exchanges heat with the water in the ice bucket to make the water temperature in the ice bucket When the temperature is lowered below the freezing point and a certain ice-making time is reached, all the water in the ice-making bucket will freeze. When melting ice, use a lifting device to lift a row of ice-making buckets in the brine pool and put them into the ice-melting pool. The ice-melting tank is filled with circulating warm water. The temperature of the ice-making bucket rises in the ice-melting tank, and the surface of the ice inside the ice-making bucket melts and separates from the inner wall of the ice-making bucket. At this time, use a lifting device to place the ice-making bucket Go on the shelf,

Rotate the ice rack so that the outlet of the ice bucket faces down, and pour the ice cubes out of the ice bucket. After aligning the ice making bucket, use the water filling mechanism on the water filling tank to add water to the specified water level, then use the lifting device to put the ice storage back to the original position of the salt water pool, and then lift another row of ice making buckets to melt the ice and pour Ice and water cycle operation.