What should I do if the ice machine has not been used for a long time and does not make ice?

What should I do if the ice machine has not been used for a long time and does not make ice?

I believe that when it comes to ice machines, everyone must be familiar with them. Because it is very common now whether it is for household or industrial use. Just like our common milk tea shop, an ice machine is definitely needed, but in the process of using the ice machine, there will inevitably be various small problems. For example, the ice machine has not been used for a long time and the ice is not made. We should what to do?

In fact, there are several methods that are very practical and simple for the ice machine not to make ice. Pay attention to the following points:

1. The ice machine dissipates heat and does not make ice. Solution: Open the cover of the ice maker to see if there is dust affecting the heat dissipation, or other foreign objects block the heat sink, and then clean it.

2. The ice machine does not fill with water. Solution: It must be that the water pump of the ice machine is broken, just repair it. The water pump needs to be cleaned regularly in 2 months. If it is well protected, it will not break easily.

3. The ice time of the ice maker becomes slower. Solution: This is very simple, the refrigerant in the ice machine is gone, just add refrigerant.

4. The compressor does not make ice when it works intermittently. Solution: The voltage is too low, check the power supply, the contact point is not in good contact, and turn on the system pressure protection.

5. The wet ice flakes of the ice machine are not hard. Solution: The water supply of the water tray of the ice machine is too high and the refrigerant is added too much, and the above phenomenon occurs when the voltage is insufficient. Add an appropriate amount of water and refrigeration system, turn off the voltage and adjust the voltage. This problem is relatively easy to solve.

6. The ice machine is leaking. Solution: The amount of water supplied to the water tray by the water inlet valve should not be too large. Appropriate amount, see if the water pipe is broken, if the water pipe is broken, just replace it with a new water pipe, see if the water level float valve is faulty, and if there is a fault, debug and repair it.