What are the tips for using commercial flake ice machines

1. The commercial flake ice machine should be installed away from heat sources, without direct sunlight, and in a well-ventilated place. The ambient temperature should not exceed 35 degrees Celsius, so as to avoid poor cooling of the condenser due to excessive ambient temperature and affect the ice-making effect. The ground where the ice machine is installed should be solid and flat, and the ice machine must be kept level, otherwise it will cause no deicing and noise during operation.

2. The gap between the back and left and right sides of the ice-making machine should not be less than 30cm, and the gap at the top should not be less than 60cm.

3. The commercial flake ice machine should use independent power supply, dedicated line power supply and equipped with fuse and leakage protection switch, and should be firmly grounded.

4. The water used by commercial flake ice machines must meet the national drinking water standards, and water filtration equipment should be installed to filter impurities in the water to avoid blocking water pipes and polluting water tanks and ice molds. And affect the ice making function.

5. When cleaning the ice machine, the power should be turned off. It is strictly forbidden to flush the machine directly with a water pipe.

6. For commercial flake ice machines, it is necessary to unscrew the head of the water inlet hose for two months to clean the filter screen of the water inlet valve to prevent the sand and mud impurities in the water from blocking the water inlet, which will cause the water inlet to become smaller, resulting in no ice making.

7. For commercial flake ice machines, it is necessary to clean the dust on the surface of the condenser every two months. Poor condensation and heat dissipation will cause damage to compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the surface of the condensation, and do not use sharp metal tools to clean it, so as not to damage the condenser.

8. The water pipes, sinks, storage bins and maintenance film of the commercial flake ice machine should be cleaned every two months.

9. When the commercial flake ice machine is not in use, it should be cleaned, and the ice mold and the moisture in the box should be blown dry with a hair dryer, and placed in a place free of corrosive gas and ventilated and dry, avoiding open storage.

Commercial flake ice machines have been widely used in aquatic products, food, supermarkets, dairy products, medicine, chemistry, vegetable preservation and transportation, marine capture and other industries. With the development of society and the continuous improvement of citizens' production levels, the occupations using ice are becoming more and more widespread. , the quality requirements for ice are getting higher and higher. The requirements for "high performance", "low failure rate" and "hygiene" of commercial flake ice machines are becoming more and more urgent.

1. The application of commercial flake ice machines in the processing of aquatic products: flake ice can reduce the temperature of processing media, cleaning water, and aquatic products, prevent bacterial growth, and keep aquatic products fresh during processing.

2. The application of meat product processing process: mix flake ice that meets hygienic standards into meat and stir. In order to achieve the purpose of cooling and keeping fresh.

3. Application in food processing process: For example, when mixing or second creaming in bread production, use flake ice to quickly cool down to avoid fermentation.

4. The application of supermarkets and aquatic product stores: it is used for fresh-keeping of aquatic products such as placement, display and packaging.

5. Application in vegetable processing: Flake ice is used in the processing of agricultural products and vegetable harvests to reduce the metabolism of agricultural products and the growth rate of bacteria. Extend the shelf life of agricultural products and vegetables.

6. Application in the long-distance transportation process: Ocean capture, vegetable transportation and other products that need to be cooled and kept fresh are more and more widely used in long-distance transportation to cool down and keep fresh with flake ice.

7. It is also widely used in laboratories, medicine, chemicals, artificial ski resorts and other industries.

⒏ Application in concrete engineering: When concrete is poured on a large scale in hot season, it is necessary to effectively and reasonably control the pouring temperature of concrete. Flake ice + cold water mixing is an effective method.