The benefits and maintenance of the flake ice machine

The benefits and maintenance of the flake ice machine

Benefits of using flake ice machine:

Flake Ice Machine, Supermarket Flake Ice Machine, Small Flake Ice Machine, Flake Ice Machine, Flake Ice, Ice Machine In fact, these are the abbreviations for flake ice machines or the customary titles of customers. Flake ice machine is a kind of ice machine, which is named for the irregular flakes of ice produced. Compared with the traditional type of ice bricks (bulk ice), flake ice has obvious advantages in that it is clean and hygienic, not easy to agglomerate, and has good fluidity.

It has a large contact area with fresh-keeping products and is not easy to damage fresh-keeping products. It is the first choice to replace other types of ice in many occupations. The structure is simple, and the floor space is small. The flake ice machine adopts a vertical internal spiral knife ice-cutting evaporator. When making ice, the water distribution device inside the ice bucket will evenly distribute the water to the inner wall of the ice bucket to freeze quickly.

After the ice is formed, the ice is cut and dropped by the spiral ice knife, so that the surface of the evaporator is fully utilized. The working principle of the flake ice machine determines the small size of the flake ice machine, high ice-making power, and small cooling capacity loss. The flake ice machine is a direct cooling ice machine. The brine cooling link shortens the ice making time and improves the ice making power.

the
Maintenance of flake ice machine:

1. The appearance of the flake ice machine unit is hygienic and clean, such as evaporator, compressor, condenser, etc. Especially for air-cooled condensers, due to too much dust, it is easy to block the suction fins and cause the condenser to fail.

2. Frequently clean the inside of the water tank, the water distribution pan and the scale in the evaporator. Sanitation is very important.

3. Check whether the water pipe of the water distribution pan is unblocked.

4. Check whether the lubricating oil level of the reducer is normal and whether the fixing bolts are loose.

5. Check whether the fully loaded ice injector at the bottom of the ice bucket is normal, and it is required to be on the same straight line.

6. The gear oil of the reducer should be replaced every year.

7. Please clean the inner wall of the evaporator with a soft cloth evenly every two months. The drain pan, water tank, salt pump, and water tank are cleaned every 15 days.

8. The air-cooled condenser is cleaned once a month.