If you want to reduce the maintenance of the flake ice machine, what points must be paid attention to?

There are many advantages, such as no need for water resources and low running costs. It is easy to install and use, no other supporting equipment is needed, and it can be put into operation as long as the power supply is used, and it will not pollute the environment. Suitable for areas with severe water scarcity or water supply. It is also widely used in hotels and restaurants. Bars etc. Do you know what should be paid attention to when using flake ice machine?

Matters needing attention when using the flake ice machine:

1. The flake ice machine must keep its level, otherwise there will be no ice and noise during operation.

2. The gap between the back and the left side of the flake ice machine is not less than 30 cm, and the gap at the top is not less than 60 cm.

3. The flake ice machine should use independent power supply, dedicated line power supply, and equipped with fuse and leakage protection switch, and the grounding is reliable.

4. The water used by the flake ice machine should meet the national drinking water standard, and it should be equipped with a water filter device to filter impurities in the water to avoid blocking the water pipe and polluting the water tank and ice mold. And affect the ice making performance.

5. Please turn off the power when cleaning the flake ice machine. Do not flush the water hose directly on the machine. Scrub with a mild detergent. Do not use corrosive solvents such as acidic and alkaline.

6. The flake ice machine must rotate the hose head of the water inlet hose for two months to clean the filter screen of the water inlet valve to avoid sand and mud in the water from clogging the water inlet, thereby reducing water inlet and no ice making.

7. The flake ice machine must clean the dust on the surface of the condenser every two months. Inadequate condenser cooling will result in compressor component damage. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil on the condensation surface, and do not use sharp metal tools to clean it, so as not to damage the condenser.

8. The water pipes, sink, refrigerator and protective film of the flake ice machine should be cleaned every two months.

9. When the flake ice machine is not in use, it should be cleaned and dried with a hair dryer. The ice mold and the water in the box should be placed in a non-corrosive gas and ventilated and dry place to avoid open storage.