How to solve the problem of reduced ice production of bullet ice machine?

How to solve the problem of reduced ice production of bullet ice machine?

Choosing to use an ice machine to make ice is for efficiency, fast and high output;

Whether it is a bullet ice machine or any other ice type, the output and quality are the key points!

However, the machine does not run smoothly all the time, especially for users who do not clean and maintain frequently, sometimes there will be a problem of less ice production.

Today, the ice machine manufacturer will talk to you about how to solve the problem of reducing the amount of ice, taking the bullet ice machine as an example!

How to solve the problem of reduced ice production of bullet ice machine?
Let me talk about the reasons first. There are five reasons for the reduction in the output of ice machines:

1. The capillary or expansion valve is blocked;

2. The water content in the system is too high, or there is a slight ice blockage;

3. The condensing system of the bullet ice machine is blocked;

4. The refrigerant of the ice machine is insufficient or the refrigerant leaks;

5. The evaporator is too dirty.

The reasons for the decrease in ice production are different, generally speaking, there are three problems: blockage, insufficient refrigerant and cleaning;

Unclog if there is a blockage; if the refrigerant is insufficient, add it. If there is a leak, check the leak location and repair it, and take out the evaporator for cleaning. In addition, the ice blockage in the system is mostly a problem with the evaporator, so pay attention to check whether the evaporator is damaged.

If you are worried that you can't grasp it well, you can contact the ice machine manufacturer for assistance!