How to choose a good quality small commercial flake ice machine

How to choose a good quality small commercial flake ice machine

At present, the prices of household ice machines in the market vary greatly, and the technical content of small commercial ice machines is higher than that of refrigerators, freezers and other refrigeration equipment. As an ordinary consumer or business friend, it is difficult to really define the pros and cons by price alone, so we will distinguish from several important aspects and some important details.

One: Look at the layout of the internal space of the machine.

First of all, after opening the small commercial flake ice machine box, basically every manufacturer uses the same refrigeration system, not to mention the compressor, condenser, desiccant, evaporator, smart electronic card board and so on. As far as the internal design is concerned, the internal design of the high-quality small commercial flake ice machine is strict, and the lines are arranged neatly and orderly. Parts that are subject to moisture or water (especially electronic control systems) will be especially waterproof. It can not only withstand long-term high temperature. This test will not affect the ice-making speed even at a high temperature of 40 degrees, and absolutely guarantees the normal operation of the machine and the safety of users. Ordinary or low-quality ice machines usually have small rear clearance, messy wiring, poor heat dissipation, poor waterproofing or no waterproofing at all; after several months or half a year of operation, the speed of ice making in high temperature climates is very obvious, reduced or even stopped damage, causing unnecessary trouble and economic loss to users.

The second is that the high-quality small commercial flake ice machine fully considers the rear heat dissipation space of the internal components; the accurate and reasonable design speeds up the ice making speed and achieves the purpose of energy saving and environmental protection. In order to facilitate future maintenance, the suspension installation method is generally adopted. Use only two external screws and a maximum of four. Disassembly and maintenance are quick and time-saving. No mobile cleaning and maintenance can be done in 15 minutes.

Two: Look at the appearance.

First, a high-quality small commercial flake ice machine is elegant in material appearance and workmanship. It will use standard stainless steel with anti-corrosion treatment, which is corrosion-resistant, easy to clean and has a long service life. If there are stains or water spots on the surface, please wipe it with a rag in time, and it will become as smooth as new immediately. Use integral injection molded plastic parts, because only then can they be beautiful, durable, strong and not easily deformed. Judging from the external manufacturing process, the stainless steel edge used for connection is smooth and will not scratch your fingers when touched; the joint space is uniform and beautiful. The thickness of the bottom plate is not concave.

However, cheap small commercial flake ice machines mainly use non-standard or even cheap thin plates; the plate processing materials are rough, have poor corrosion resistance, and are easy to deform; in order to reduce production costs, some plastic parts are injection molded with various materials recovered from waste stations. into. Not only the appearance is not beautiful, but also the quality is poor, fragile, the service life is short, and more importantly, the sanitation is not guaranteed; and the lack of perfect management system and process in the production process leads to large and irregular gaps between the plates during the production process Uniform and rough, users can easily scratch their fingers when moving or using, which greatly affects the appearance of the whole machine. The bottom plate is very thin, and the entire bottom plate will sag due to the inability to support the weight of the internal components after about half a year of use.