Checks for an Ice Maker Not Making Ice

Checks for an Ice Maker Not Making Ice

1. The compressor works intermittently

1. The voltage is too low. Check power supply. 2. The contact point is burned and the contact is not good. 3. System pressure protection. 4. The starter of the compressor is faulty. 5. The condenser is too dirty, high pressure protection.

2. Reduced ice production

1. The capillary or expansion valve is blocked. 2. The water content in the system is too high and there is a slight ice blockage. 3. The condensing system of the ice machine is blocked. 4. Insufficient or leaking refrigerant. 5. The evaporator is too dirty.

3. Wet ice flakes are not hard

1. The ambient temperature is too high, especially in summer. 2. The repaired machine has more refrigerant. 3. The water supply of the water tray of the ice machine is too large. 4. The power of the press is insufficient.

4. The machine runs but does not produce ice

1. There is not enough water in the water tray or there is no water. 2. The reducer is faulty or the geared motor is faulty. 3. System failure, ice blockage, dirty blockage, etc. 4. The ice maker is leaking snow, and the pressure is not enough. 5. The ice cubes are not thick enough.

5. The ice machine is leaking

1. The amount of water supplied to the water tray by the water inlet valve is too large. 2. The connecting water pipe is damaged. 3. The pipe clamp is faulty. 4. The water level float valve is faulty.

6. Excessive noise

1. The fan of the ice maker is faulty. 2. The reducer is faulty. 3. The compressor is noisy.

Seven, water shortage alarm

1. The filter screen of the water supply joint is blocked. 2. The water supply pipe is blocked. 3. The water inlet valve is blocked. 4. The drain valve is leaking. 5. The water pump is faulty.

8. Report system failure when booting

1. Phase sequence problem. 2. The power supply system is faulty. 3. Control board failure